Do not lay solid wood flooring on rainy days.

Whether it is paving solid wood flooring or laminate flooring, try not to lay it on rainy days. Because the air is wet in the rainy days, the ground is damp, the water evaporates slowly, and the glue dries slowly. In this case, the wooden floor is paved, and it will be prone to deformation or hollowing in the future, especially on the first floor. . In the cloudy days where the air humidity is not very large, it is possible to lay the wooden floor, but it is very important to check the moisture content of the floor. Generally, the laminate flooring and the solid wood composite floor can meet the requirements, while the solid wood and bamboo flooring must be checked, otherwise it will be winter. The interior is dry and heated, and the floor will be too thick.

After passing the inspection, be sure to put the floor into the original packaging and wrap it in plastic cloth, otherwise the floor will absorb the humidity in the indoor air and deform. When paving wooden floors on a cloudy day, the owner should pay attention to remind the decorators to make the paving compact. Otherwise, the weather will be clear, and the water will be evaporated, which will cause the wooden floor to shrink and the gap between the floors to increase.

At the same time, we should also pay attention to the following points: the base layer must be smooth, dry, and should be sprinkled with insect-proof powder on the ground before laying on the floor, and then padded with a layer of moisture-proof cloth; the paved keel must be dry, and the moisture content is less than or equal to 15%. The keel or the splint (the splint should be sawn to a size of no more than 600×600mm, and a gap of 5~10mm should be left between the splints) plus a layer of moisture-proof cloth to achieve double protection to prevent moisture intrusion. The floor is made of 18mm thick. When paving, the floor and the surrounding walls are separated by 8-10CM. The joint between the floors can be fixed with special waterproof floor glue or straight nails. All floor splicing should be longitudinally misplaced for paving; it is recommended that each piece of floor splicing be tapped with rafts and wooden slats so that each floor of the male and female shackles is tightly closed, and the glue overflows the interface, after drying Gently shovel the excess glue that has leaked out. If the amount of glue is insufficient, it will not overflow the surface, and there may be sequelae such as cracks, unsealed interfaces, and insufficient moisture resistance.

Bath Soap

Soap is a widely accepted personal cleaning supplies, cleaning ability is strong, the price is cheaper, has become a necessity of people's life.But for different groups, the choice of soap is different.Soap makes a traditional washing product commonly used by each family, and soap is still a necessity for most people, usually solid, but also with plaster and liquid products. As people's living standards improve, they not only require the function of cleansing, but also to find some new work energy such as beauty, sterilization and deodorization.The function of plant soap is clean washing, which is of course to remove dirt, skin secretions, feces, chemicals, or bacteria, etc., and the cosmetics, maintenance products or drugs that remove skin surfaces are one of the main USES.

Bubble Bath Soap,Best Bar Soap,Foaming bath butter

DONGGUAN VOLES COMMODITY CO., LTD , https://www.volescommodity.com