Hdpe Spray Bottle,Hand Sanitizer Bottle,Disinfectant Spray Bottle,Hand Sanitizer Pump Bottle GuangZhou ShenRuo Plastic Manfacturing CO.,Ltd , https://www.cnbottle.com
Slitting machine blade slitting paperboard tail deflection:
1. The cutting blade blade feed positioning plate is improperly adjusted; 2. The cutting blade has a blunt degree, which is different from the line speed of other knives; 3. The paper guide wheel of the slitting machine is improperly adjusted; 4. Cutting The blade is not feeding properly. [2]
The slitter blade produces a raw edge:
1. The cutting machine blade is blunt and should be polished; 2. The cutting machine blade and the sipe overlap too shallow; 3. The sipe of the slitting machine blade is wound into the paper edge and paper wool, and should be thoroughly cleaned and then turned on; 4. The slot gap of the slitting machine blade is too large, generally not more than 2.5mm.
The slitting line of the slitter blade is easily broken:
1. The original paper is inferior; 2. The pressure line is too deep.
The slit line of the slitting machine blade is not straight:
1. The cutting line of the slitting machine is too shallow, the folding line is uneven, which affects the appearance of the box; 2. The cutting blade of the cutting machine is deflected; 3. The upper and lower pressing wheels of the cutting machine are not adjusted.
The cutting edge of the slitter blade is not vertical:
1. The angle of the blade of the slitting machine is not correct; 2. The blade of the slitting machine is not in the center of the sipe; 3. The blade of the slitting machine is sharpened.