Model NO.: 2012WL
Material: Pulp
Glue: Solvent-Based Acrylic
Glue Thickness: 0.03mm
Liner: No Liner
Backing: Aluminum Foil /Pet
Backing Thickness: 0.03mm(Al+Pet)
The Total Thickness: 0.06mm
Peel Adhesion: 10n/25mm
Tensile Strength: 55n/25mm
Trademark: XPACK
Transport Package: Plastic Film, Master Carton and Pallet
Specification: Customized
Origin: China
HS Code: 7607200000
Model NO.: 2012WL
Material: Pulp
Glue: Solvent-Based Acrylic
Glue Thickness: 0.03mm
Liner: No Liner
Backing: Aluminum Foil /Pet
Backing Thickness: 0.03mm(Al+Pet)
The Total Thickness: 0.06mm
Peel Adhesion: 10n/25mm
Tensile Strength: 55n/25mm
Trademark: XPACK
Transport Package: Plastic Film, Master Carton and Pallet
Specification: Customized
Origin: China
HS Code: 7607200000
DescriptionXPACK 2012WL Self Wound Aluminum Foil Tape is a polyester-foil (12 PET+ 20u Foil) backing, combined with a high performance solvent acrylic adhesive andprotected by easy release liner.
Â
| COMPOSITIONÂ Â | Â 2012HL |
| GLUE                           | Solvent-Based Acrylic |
| GLUEÂ THICKNESS | 0.03mm |
| LINER | No Liner |
| BACKING | Aluminum Foil /PET |
| BACKINGÂ THICKNESS | 0.03mm(AL+PET) |
| THEÂ TOTALÂ THICKNESS | 0.06mm |
| Peel Adhesion | 10N/25mm |
| Tensile Strength | 55N/25mm |
| Tack Rolling Ball | ≥4# |
| Elongation | 4% |
| Foam Combination Rate | 90% |
| Working Temperature | -120ºC~150ºC |
| Apply Temperature |  10ºC~40ºC |
Storage And Useage Conditions    Â
 From the date ofproduction 24 months,stored in a cardboard box, the temperature 21 ºC, relative Humidity less than 50% of the environment.
Applied Technology
Adhesive strength depends on the extent of theadhesivebetween glue
and surface. Surfaces to which tape is applied should be clean, dry and free of grease, oil, moisture, dirt and other contaminants. Using some surface cleaners such as isopropanol, ethanol or heptanes.
The tape's ideal application for temperature range of 70-100ºF(21ºC to 38ºC).The tape is not recommended for use on a temperature below 50ºF(10ºC) surface. Because the adhesive becomes hard so stick force smaller.However, once properly applied,low temperature operation generally meet the requirements.
Application Market
•Bundle stick in the refrigerator coils
• Moisture Barrier And Seal the pipe
• Temperature Insulation
• decoration, protection, maintenance, shut down
ertificate / Accreditation
MSDS:XPACK provide the product MSDS.
RoHS: accord with the requirement of eu RoHS, and can provide the relevant certificates.
TSCA:The product under the Toxic Substances Control Act is defined as supplies, therefore, the product is not in the requirements.
More information please contact with Ms.Yaki
yaki@xpack.cc
 Description
XPACK 2012WL Self Wound Aluminum Foil Tape is a polyester-foil (12 PET+ 20u Foil) backing, combined with a high performance solvent acrylic adhesive andprotected by easy release liner.
Â
| COMPOSITIONÂ Â | Â 2012HL |
| GLUE                           | Solvent-Based Acrylic |
| GLUEÂ THICKNESS | 0.03mm |
| LINER | No Liner |
| BACKING | Aluminum Foil /PET |
| BACKINGÂ THICKNESS | 0.03mm(AL+PET) |
| THEÂ TOTALÂ THICKNESS | 0.06mm |
| Peel Adhesion | 10N/25mm |
| Tensile Strength | 55N/25mm |
| Tack Rolling Ball | ≥4# |
| Elongation | 4% |
| Foam Combination Rate | 90% |
| Working Temperature | -120ºC~150ºC |
| Apply Temperature |  10ºC~40ºC |
Storage And Useage Conditions    Â
 From the date ofproduction 24 months,stored in a cardboard box, the temperature 21 ºC, relative Humidity less than 50% of the environment.
Applied Technology
Adhesive strength depends on the extent of theadhesivebetween glue
and surface. Surfaces to which tape is applied should be clean, dry and free of grease, oil, moisture, dirt and other contaminants. Using some surface cleaners such as isopropanol, ethanol or heptanes.
The tape's ideal application for temperature range of 70-100ºF(21ºC to 38ºC).The tape is not recommended for use on a temperature below 50ºF(10ºC) surface. Because the adhesive becomes hard so stick force smaller.However, once properly applied,low temperature operation generally meet the requirements.
Application Market
•Bundle stick in the refrigerator coils
• Moisture Barrier And Seal the pipe
• Temperature Insulation
• decoration, protection, maintenance, shut down
ertificate / Accreditation
MSDS:XPACK provide the product MSDS.
RoHS: accord with the requirement of eu RoHS, and can provide the relevant certificates.
TSCA:The product under the Toxic Substances Control Act is defined as supplies, therefore, the product is not in the requirements.
More information please contact with Ms.Yaki
yaki@xpack.cc
Â
NINGBO HOZ TRADING CO.,LTD , https://www.hoz-kitchenware.com