With the development of science and technology, new and higher requirements have been put forward for the measurement work, how the measurement work will be integrated into the production and research of various science and technology; and how to provide pioneering tests and tests for improving product quality New technologies, new methods, how to strictly follow the international standard rules, and formulate a set of effective quality control and detection methods in combination with the characteristics of the products, is a problem that measurement science urgently needs to study and solve, and realizes and perfects the automation of test and test management. Networkization and integration are the development direction of the measurement work itself. National Unified Service Hotline: 400-0711-808 Haida International Instrument: 0769-89280808 company website: Source: Dongguan Haida International Instruments   Reproduced without permission! (Or: if you need to reprint, indicate the source)
Cutting boards are arguably one of the most important tools in your kitchen - it's near impossible to cook without one.
There are four reasons why use a Cutting Board as below:
1.Cutting boards protect your expensive counter top from damage resulting from the sharp edge of the kitchen knife.
2.They also protect the edge of the knife from damage from the counter top (at least in the example of a wood cutting board.
3.They can be used to handily move the chopped or cut food to a skillet or pot, keeping most of the mess in a small easy to clean area.
4.They can be easily cleaned and disinfected in the kitchen sink.
It is a very good idea to have more than one board, one exclusively for vegetables and one specifically for meats. Two boards help prevent cross contamination of the raw meat preparation with the vegetables and salad. Two cutting boards is one more way to keep the meal safe from bacterial contamination.
The one universally agreed upon method of cleaning and sanitizing both wood and plastic boards is as follows. First a thorough scrubbing with warm soapy water - be sure to remove all food particles, oils, grease, and residue. Secondly a mixture of water and bleach solution (one tablespoon of liquid chlorine bleach in one gallon of water) to completely disinfect the surface area all around. Thirdly and importantly let the board completely dry.
First, quality is the lifeblood of economic development, and measurement is a guarantee of quality.
   Modern industrial production requires specialization, socialization, mechanization, and automation. First of all, accurate and consistent measurement must be conducted; companies must reduce costs and reduce consumption. To improve product quality, we must ensure that measurement and measurement methods in production and operations are complete and accurate. Only through effective economic accounting can we control the quality of products and the quality of the final product in processing. Metrology technology runs through all walks of life and is the horizontal technology foundation for all social services. Today’s society can be said to “ not measure, do it †. With the development and application of new technologies, there is an urgent need for highly accurate metrology technologies.
Second, with international standards
   1. GB / T19000 - ISO9000 series standards and GB / T19022 - ISO10012 standard GB/T19000 series standards, the core idea is to establish a complete product quality assurance system, requires a complete inspection system, product development / design The entire process of production, installation, and service, especially the most rigorous and maximal control of the production process, ensures product quality. And GB / T19022 standard GB / T19000 series of standard quality measuring apparatus assurance requirements refinement.
   2. GB / T19000 series of standards on the quality assurance requirements of measurement, clear the accuracy required for all measurement items of the product, select appropriate inspection, measurement and test equipment to ensure the necessary accuracy and to verify whether the product meets the required requirements The inspection and measurement and testing equipment, whether supplied by the organization, leased or demand, shall be controlled, calibrated and maintained by the supplier. In the GB / T19000 family of standards, the measurement work including inspection, measurement, and testing is one of the main elements of the quality system element of the family standard and is also an important link in the quality loop. The GB/T19000 standard also stipulates that all measurement and test systems must be controlled as necessary, from the management of measurement equipment to the control of equipment, from the development of equipment control to the statistical control of the measurement process, reflecting the international quality management process. The requirements for measuring equipment have developed to a completely new stage. From this we can see that the quality assurance of measuring equipment occupies a very important position in quality certification.
Third, corporate measurement work to improve product quality services
   Metrology is a technical foundation work, and it plays a very important role in ensuring product quality and service quality. This is fully reflected in GB / T19022 as a support standard for GB / T19000 quality management and quality assurance system standards. GB / T19022 "Quality Assurance Requirements for Measuring Equipment" is a set of requirements for measurement from the perspective of quality management. The quality management of metrology and inspection equipment does not require companies to bear additional burdens. It is a series of measures that proceed from the assurance of quality. An important technical foundation work at work. The level of a company's measurement work is often an important indicator reflecting the level of production technology and product quality of the company. The GB / T19022 standard is an important step in the integration of metrology work with international standards. It is also a standard that must be referenced and meet the requirements in quality certification. The GB / T19022 standard is the best embodiment of metrology for quality service. To narrow the gap between China and the international advanced level, it is necessary to improve the level of measurement science and technology, establish and improve the quality test tracking system for design, development, production inspection, and testing, and implement the overall management of the inspection quality assurance system. What is more important is to resolve the traceability of important products and the issue of international standards as soon as possible. Really realize the goal of measuring direct economic and technological services
Cutting Board
Cutting Board,Chopping Board,Kitchen Cutting Board,Large Cutting Board
Yangjiang Superwins Trade Co., Ltd. , https://www.superwins-kitchenware.com