Shanghai Haozhuang Instrument Co., Ltd. has developed the LNB brand light incubator, which is energy-saving and environmentally friendly, leading the country. Professional manufacturing is more secure and affordable Digital display light incubator 1. The shell of the incubator should be reliably grounded. 2. The incubator should be placed in a cool, dry, well-ventilated place away from heat sources and sunlight. Place it steadily to prevent vibration and noise. 3. To ensure effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 100mm, the side of the box should have a gap of 50mm, and the top of the box should have at least 300mm of space. 4. During transportation, repair and maintenance of the incubator, avoid collision, shaking and vibration, and the maximum inclination is less than 45 degrees. 5. The instrument suddenly does not work, please check whether the fuse tube (behind the box) is burnt out, and check the power supply. 6. When cooling the incubator, it is not advisable to make the difference between the temperature in the chamber and the ambient temperature greater than 25 degrees. 7. Illumination time can be programmed and controlled by the "programmable time controller. Please refer to the instruction manual of the programmable time controller for programming method. Digital display shaking incubator 1. Accurate use and attention to the maintenance of the instrument, so that it is in a good working state, which can extend the service life of the instrument. 2. During the continuous working period of the instrument, periodic inspections should be done every three months; check the fuses, control components and fastening screws, and whether there are water drops, dirt, etc. falling on the motor and control components. 3. The bearings of the transmission part have been filled with a proper amount of grease (No. 1 calcium-naki) before leaving the factory. The instrument should be filled with grease every six months during the continuous working period. / 3. 4. The instrument is used regularly, and natural wear is normal. After the instrument is used for one year, if abnormal noise is found in the motor and compressor; the bearing of the transmission part is worn, the belt is loose or cracked, and the failure of the electronic control component is found by the manufacturer. 5. The compressor should avoid continuous starting. The company's main business and production scope include: testing instruments, laboratory equipment, cleaning equipment, environmental protection equipment and undertaking the design and customization of non-standard products and providing related technical services. First-class technology, first-class service. Since the establishment of the company, the products and services have been recognized by customers and have a good reputation.
Laminated Packaging Film is a type of rolls who suit for the automatic sealing machine(Form-Fill-Seal Machine). We supply in much different structure, different size and different thickness for different products. The maximum width of our packaging films can be 1250mm.Print up to 12 colors. Need any quote or advice for roll film,please just contact us.Thanks!
Laminated Packaging Film Packaging Roll,PE Roll Film,Clear Roll Stock Film,Plastic Roll Stock Film ZHEJIANG GONFOR SOFT-PACKAGE CO.,LTD , https://www.chinasoftpackage.com