When the modern family is decorating the wardrobe according to their own type, then the problem comes. Which kind of board is good for the wardrobe? At present, there are mainly the following types of plates on the market, and consumers can purchase them as needed. Let's take a look at the top ten brands of environmental protection plates, Shenzhou Home Plate.
Red light therapy is also called low-level laser therapy (LLLT), low-power laser therapy (LPLT), and photobiomodulation (PBM).
Red Light Therapy,Winkle Reduing Home Led Red Light Therapy,Penetrates Skin Intelligent Control Near Infrared Red Led Medical Equipment Shenzhen Bonliter Optoelectronic Co., Ltd. , https://www.bonliter.com
1. MDF (MDF): The MDF is formed by powdered wood fiber at high temperature and has a good surface flatness. Because of its soft and impact resistance, high strength, uniform density after pressing, it is also easy to reprocess, suitable for plastic panels, baking varnishes and so on. But the disadvantage is that the waterproof is very poor, it is easy to expand and deform.
2, solid wood particle board: solid wood particle board is a new type, high-grade environmentally friendly substrate, is the production of the board by the particle board process. The density of solid wood particle board is relatively high, and the wood fiber particles in the board are large, which preserves the essence of natural wood. The content of solid wood particle board in the use of adhesive is generally less than 5%, and the environmental protection is better. In addition, its processing properties are as good as particleboard. The particle board is insulated and absorbs sound. Because the preparation method is easy, the quality is very different, it is difficult to distinguish, the bending resistance and tensile resistance are poor, and the density is loose and easy to loose.
3, solid wood multi-layer board: multi-layer board is made of three or more layers of a solid wood veneer or thin-plate adhesive hot pressing, common three plywood, five plywood, nine plywood and twelve plywood (commonly known as plywood , five PCT, nine PCT, twelve PCT). The core has: poplar, mixed wood, amine wood multi-layer board; good structural strength and good stability.
4, blockboard: solid core core of the core board, good grip strength, high strength, quality, sound absorption, heat insulation and other characteristics, and water content is not high, between 10% -13%.
5, fir board (fir fingerboard): Glulam is a new type of solid wood material, using large-diameter logs, deep processing and imaging fingers like staggered stitching. Glulam can be directly painted and painted, saving a process compared to blockboard.
6, ecological paint-free board: melamine Malacca ecological paint-free board, or melamine whole fir ecological paint-free board, is a solid wood ecological paint-free board, good stability, strong resistance to deformation, strong nail holding power, the most important environmental protection The level is very high to reach the European E0 standard, and the formaldehyde emission is below 0.5.
7, fire board: almost extinct, is the use of siliceous materials or calcium materials as the main raw material, with a certain proportion of fiber materials, lightweight aggregates, adhesives and chemical additives mixed, by autoclaving technology Decorative sheet, the thickness is generally 0.6-1.2mm; the fireproof board is economical, high-strength, fire-resistant and moisture-proof. Fireproof panels are mainly used for cabinets, showcases, etc. The construction of fireproof board has higher requirements for sticking glue. It is necessary to master the thickness of the glue and the glue drying time, and it should be pasted one time. 