Quick details for Animal train, electrical train
Kids Electric Train (big size) Kids Electric Train,Electric Train For Kids,Toy Electric Train For Kids,Electric Train For Children,Cheap Electric Trains Shanghai LULU Toy Car Co., Ltd. , http://www.lulu-toycar.com
Many kinds of plastics, lack of practical identification techniques that can be operated on the spot, experience-based judgments; identification is the most basic technology, very particular about the experience, not a comprehensive 3 years, 5 years difficult to grasp; combustion identification is the most common, but In addition to experience and experience, in fact, there are also mature and simple experimental methods that can identify more than 100 plastics in more than 10 different categories. Without this effort, it is easy to take a look at the procurement of scrap, and everyone is familiar with the product. Either the price is high or there is no stock.
II: Cleaning and Cleaning Technology
Non-pollution plastic cleaning, cleaning technology (plastic surface coating, adhesive paper, paper, metal, wood and other impurities, the removal of recycled plastic odor, the application of high cleaning requirements: such as PET bottle tablets). Solvent-based cleaning technology is simply poisoning humans. Be careful and call your peers to stop using them. Including the ones recently recommended by the website, we have seen many places recently recommending cleaners for the recycling of waste plastics. Talk about several major hazards of solvent-based cleaners, look forward to peers also express their opinions, we discuss:
The first major hazard: poisoning the specific operations staff, sterilization \ cancer \ leukemia many malignant lesions are related to many organic solvents.
The second largest hazard: polluted water;
The third major hazard: prone to fire and explosion accidents;
The fourth major hazard: Under the impression that there has been no change in appearance, in fact, many solvents have a great influence on the performance of plastics, especially engineering plastics, but no detection equipment cannot be observed with the naked eye.
Fifth: The need to warm even more carefully, the solvent is very volatile, heating is very easy to fail, that can be repeated, with a second time it is difficult to say how.
Three: separation technology
1. Separation of various impurities in plastics: wind separation of density separation, selection of other mature separation equipments such as electrostatic selection and magnetic separation;
2. Separation technology of mixed plastics with the same density (PET/PVC, ABS/HIPS, PP/PE, various electrical appliances mixed plastics) (International leading plastic flotation technology, core technology of Guangzhou Iron and Steel MBA factory)
3, the same plastic different color particles separation technology
This is the core technology of the plastic recycling industry. It is difficult and has high added value.
Four: Recycling of Special Plastic Products
Composite film recovery technology, composite plastic recycling;
In the past two days, many websites have sold a lot of German sausage compound film messages, only 100 euros a ton, cheaper, because composite films are very difficult to recycle. However, most Chinese ham sausages are packaged with something called PVDC. It is not known whether there are different kinds of composite plastics in Germany and China. There are two kinds of recycling methods. One is separation and the other is modification, which can greatly increase the additional value. But the technical difficulty is very big.
V: Cannot form a closed-loop pollution problem
1, the sewage treatment process
2. Gas pollution in the granulation process, odor removal.
3, the problem of unrecoverable garbage
VI: Value assessment and application of recyclable plastic resources and recycled materials
1. Most enterprises lack basic inspection and inspection equipment, and the industry lacks the recognized pricing basis based on the characteristics of the resources themselves;
2. The lack of operable standards for classification and classification of recyclable plastic resources and recycled materials;
3, the application of recycled materials lacks systematic research;
Seven: The performance of the recycled material is stable and the modification technology
This is also a key technical link that can improve the technological content of the plastic recycling industry. However, most plastic recycling companies do not have the technology and concepts in this regard. In the increasingly competitive real environment, the performance of recycled materials is stable and the modification technology is very high. important.
Eight: Chemical recovery method
In the past, plastic refinery, which was very hot, was still immature due to various reasons. Due to the large investment in equipment, it has been developing slowly in recent years.
Nine, the implementation of recyclable ideas in the design of plastic products
This is a key issue for the sustainable development of the plastics industry. It is a solution to the source problem, but it is rarely promoted.
Tenth, other
Among the top ten challenges, there are three most critical technologies: one: sorting and separation technology of plastics; two: non-polluting cleaning/cleaning technology; and three: value evaluation and application direction are also one of the key issues.
In order to provide practical help for industry companies in solving practical technical problems, the China Plastics Association’s Waste Plastics Specialty Committee held the second phase of the plastic recycling technology training class after the successful holding of the first session of the class, which targeted the above-mentioned practical work. The problem is that the training course is divided into two training courses: "Identification, sorting and price evaluation of waste plastics and recycled materials" and "Technology of modification and application of waste plastic granulation and recycled materials".
Name: Animal train, electrical train
1.Material: Plush & Metal(washable)
2. Bearing Capacity: 500kgs (parents can seat with their kids)
3. Dimension: 220*110*120cm(train head),150*110*120cm(train carriage)
4. Material: steel frame, fireproof plush product
5. Battery: 12v/60Ah*4pcs
6. Charger: 12V/6A charger, one charger for one train
7. Minimum age to ride this machine: 2
8. Charing time: 12 hours, can use for 3~4 hours
9. motor:48v800w
10.Suitable age: 2-8 years
Specifications
Animal train, electrical train, Zippy Rides
Factory offer directly 2.Guaranteed 1 year quality 3.CE
Function:
1.Forward & Backward, turning left, turning right and stop
2.With automatic brake
Contract term:
1. Sample time:20days, Ship time: with in 35days
2.30% as depoist, 70% as balance after we offer copy of B/L.
3.T/T or L/C is welcome.
4. MOQ is 1PCS.
Remark
1.Rechargeable battery and charger included.
2.English manual included.
3.can mixed any model in one container is available.
4.All material is environmental-friendly, no harmful for kids to have fun.
5.Product has patent in China, could pass all kinds certification, no problem with sale in almost all world.
Features:
A) Easy staff management
B) Easy budget to manage
C) Easy maintenance and repair
D) Small investment, short period, quick effectiveness and fund repay
E) We offer different prices based on different quantities.
F) We offer most spare parts free of charge according to your quantity.
G) The covering coat can be taken off and washable, new designed with attractive model.
Advantage of our company:
1.6 years Production experience
2. Professional design and manufacture child ride on electric car with remote control coin control and key control.
3. Experienced exporting, child cars were widely sold in Europe Marker, American Market, Asian Market ect.
4. Product has all kinds of certificate make your import easier, including CE, EN71, EN62115.
5. Delivery time is on time, small quantity and mixed order are acceptable, most model has stock quantity for fastly sales.
About myself:
Dear customer, I'm monica, 29 years old, customer service of LULU Toy Car Factory. Thank you for vist our product, sincerely hope to service for you.
If you want know more information, pls contact us freely. Welcome to copy : "Dear monica, I'm interested in this car. Could you let me know the latest price.I would like to have your reply soon" while sending inquiry, I'll reply you within 8 hours including our holiday. Waiting you whole day on Skype: mqq322117
Technical issues encountered in plastic bottle recycling
A: Identification Technology