The bathroom is the most important place for every family, so it is very important to buy every kind of supplies inside, especially toilets. However, for many owners who are newly renovated, the selection of the toilet does not understand. How can one choose the toilet that suits them? Today Xiao Bian came to explain the type of toilet and the precautions for toilet selection. First, the type of toilet 1, by type: Siamese and split Which of these two is good is actually determined in accordance with the size of the bathroom. The former is more modern, one-piece, and the appearance is high-grade. The options available to consumers are also varied, but the price is higher. The latter is more traditional and uses screws and seals to connect the base and the tank to the second floor, so it occupies space, and the joints are easy to hide dirt. 2, according to the direction of sewage: back row and bottom row The former is the rear direction of sewage, it can be said that the wall row, the center of the pipe should be at least 180 mm with the ground; and the latter can be understood as the ground row, buy pay attention to the center of the sewage outlet from the wall distance 400mm, 305mm, 200mm three, in general the northern market for the 400mm pit distance product demand is large, while the southern market for 305mm pit distance product demand is large, consumers must be prepared to measure the pit distance before buying, so as not to be too large or Too little impact on the installation. 3, press the water way points: flush type and siphon type It is related to the previous introduction. For example, if the pipe is in the lower row, then the latter is the best choice. It is based on the effect of water forming a siphon in the sewage discharge pipe to discharge the waste. The sewage outlet is small and has the advantage of low noise. . The disadvantage is the large amount of water used. Generally, 6 liters of storage are used up. Second, the toilet selection considerations 1, weight This type of product is heavier and heavier, because of the heavy density, solid products, the general average is 25KG, high-quality but it may have 50KG, you can choose to buy a weight, if you do not have the ability to move the whole, then you can set off The lid of the water tank is awkward, as the weight of the tank lid is often proportional to the weight of the toilet bowl. 2, test tank In general, the higher the water tank, the better its momentum, but also to carefully check whether it will leak, by dropping a few drops of ink into the box, stir even to see if there is a color liquid out, if there is a leak in the toilet The place. 3, touch the glaze Due to the material, we can judge its quality from the appearance, such as glazed surface. Generally speaking, the smooth appearance has no pores, and the products with soft colors are excellent products. The principle of reflecting light can be used to observe. In addition, you should also touch the sewer of the toilet. If the sewer is rough, it is easy to catch the dirt. <\p><\div>
Stainless Steel Vacuum Tumblers are made from high-grade 18/8 stainless steel. This material is food grade, non-toxic, durable and easy to clean.
And we got a lot of different kinds of Stainless Steel Bottles. For example: Stainless Steel Cola Bottle, a classic design that is popular in the market and easy to use, also looks good. Speaking of looking, our Cola Bottle comes in changeable colors and diverse patterns.
Stainless Steel Insulated Tumbler,Stainless Steel Tumbler,Vacuum Insulated Tumbler Coffee Cup,Double Wall Tumblers,Vacuum Insulated Tumblers Ningbo Auland International Co.,Ltd. , https://www.ecocolabottle.com
