Chain type feeder multi-color printer slotter die cutter

Configuration :
Printing unit:
Printing precision:±0.5mm

Printing roller
External diameter is Ø528mm(diameter is Ø540mm including plate)
Surface grinding, hard chromium plating.
Dynamic and static balance correction, smoothly operation.
2.Printing pressing
External diameter is Ø164mm
Grinding, hard chromium is plated on steel tube surface.
Dynamic and static balance correction, smoothly operation.
Printing press roller gap adopts digital electric adjustment, and adjust scope is 0-12mm.
3. Metal Anilox Roller
External diameter is Ø180mm
4. Rubber Roller
External diameter is Ø164mm
Corrosion resistance rubber is wrapped on steel tube surface.
Rubber roller is grinded specially, ink transfer effect is good.
5. Phase adjusting mechanism
Planetary gear structure.
Digital display type phase instructions, operation more convenient, intuitive and accurate.
Printing adopts electric digital 360 degrees adjustment accordingly  (run or stop can also be adjusted), phase modulation precision can reach 0.15 mm
6. Ink circulation
Pneumatic diaphragm pump, ink-supplying stably, make it simple to operate and maintain.
Adopts ink -saving cleaning device, can save the ink effectively.
Ink filter, can filter impurities.
7. Axial adjusting mechanism
Manual type axial adjusting mechanism.
 Digital display type position indicator, make the operation more convenient, intuitive and accurate.

Slotting unit:

1. The knife dish slot configuration

Slotting precision: ±1.5mm
clearer burr : 

1. Diameter of axle is Ø110mm, after two times of grinding, hard chromium is plated on surface, moving smoothly.

Adjustment scale turbine box line pressing wheel clearance, adjust scope is 0-12mm
Slotting knife holder transverse adjusting mechanism

1. Diameter of axle is Ø156mm, bedplate diameter is Ø280mm, after two times of grinding, hard chromium is plated on surface, moving smoothly
2.  Slotting knife width is 7mm
3.  Alloy tool stainless steel material is dealled by heat, grinding tooth slotting knife, trimming knife, with good hardness and toughness,also high precision

Slotting phase adjusting mechanism: planetary gear structure
 Transmission gear

1. Main Transmission  gear

1. Thickness of wheel gear is 50mm, using (HT150) ball mill steel, carburizing heat treatment
2. The precision is Grade6-7, hardness is 58-62 degree, life time can last 20years.
3.  Dealed with  finish-milling and processing, reduces the machine noise , keep machine operate smoothly

1. The key link

By free key link, can make the shaft connected to the gear, there will be no gap when working, make Installation and maintenance more convenient, can make the machine for a long time the high precision, ensure the printing alignment.
Rack Unit

1. Wallboard is 40mm solid, 160 joist steel tiepiece, make the machine run smoothly.
2. The thickness of working table is 3mm.
3. Walking is 40 mm solid cold drawn roll.
4. Ground rack is cast iron, make machine work more smoothly.

Parameter:
Delivery pictures:


Carton box pictures:


Our service:


  Chain type feeder multi-color printer slotter die cutter

Configuration :
Printing unit:
Printing precision:±0.5mm

Printing roller
External diameter is Ø528mm(diameter is Ø540mm including plate)
Surface grinding, hard chromium plating.
Dynamic and static balance correction, smoothly operation.
2.Printing pressing
External diameter is Ø164mm
Grinding, hard chromium is plated on steel tube surface.
Dynamic and static balance correction, smoothly operation.
Printing press roller gap adopts digital electric adjustment, and adjust scope is 0-12mm.
3. Metal Anilox Roller
External diameter is Ø180mm
4. Rubber Roller
External diameter is Ø164mm
Corrosion resistance rubber is wrapped on steel tube surface.
Rubber roller is grinded specially, ink transfer effect is good.
5. Phase adjusting mechanism
Planetary gear structure.
Digital display type phase instructions, operation more convenient, intuitive and accurate.
Printing adopts electric digital 360 degrees adjustment accordingly  (run or stop can also be adjusted), phase modulation precision can reach 0.15 mm
6. Ink circulation
Pneumatic diaphragm pump, ink-supplying stably, make it simple to operate and maintain.
Adopts ink -saving cleaning device, can save the ink effectively.
Ink filter, can filter impurities.
7. Axial adjusting mechanism
Manual type axial adjusting mechanism.
 Digital display type position indicator, make the operation more convenient, intuitive and accurate.

Slotting unit:

1. The knife dish slot configuration

Slotting precision: ±1.5mm
clearer burr : 

1. Diameter of axle is Ø110mm, after two times of grinding, hard chromium is plated on surface, moving smoothly.

Adjustment scale turbine box line pressing wheel clearance, adjust scope is 0-12mm
Slotting knife holder transverse adjusting mechanism

1. Diameter of axle is Ø156mm, bedplate diameter is Ø280mm, after two times of grinding, hard chromium is plated on surface, moving smoothly
2.  Slotting knife width is 7mm
3.  Alloy tool stainless steel material is dealled by heat, grinding tooth slotting knife, trimming knife, with good hardness and toughness,also high precision

Slotting phase adjusting mechanism: planetary gear structure
 Transmission gear

1. Main Transmission  gear

1. Thickness of wheel gear is 50mm, uHospital Bed Series

   Hospital Bed Series,Nursing Bed,Pediatric Bed,Hospital Folding Bed

   Hebei Boxin Rehabilitation Equipment Co., Ltd , https://www.boxinnursingbed.com