Laboratory curing equipment for UV coating research

Many engineers who study UV coatings need to understand the characteristics of coatings and the actual curing effect and process conditions through experiments. They hope to obtain a set of light curing equipment to do various light curing tests. They need to choose an economical and suitable light curing equipment. Very necessary.

In general, for R & D personnel, the control of intensity / energy is very critical. Many engineering personnel call. The first is how to control your intensity, how to adjust energy, how to adjust the intensity uniformity, how to spectral characteristics, and even whether there is The thermal filter, the shape of the reflector, etc., how to control the exposure time, etc., are very detailed. The other is the tendency to buy products of large manufacturers with stable quality. It is understandable that the general laboratory will only be equipped with a set of equipment due to application problems. Once a quality problem occurs, it will seriously affect the progress, ranging from one week to several months. In addition, due to the limitation of the site of the laboratory or scientific research unit, there are generally few ventilation systems, and there are also restrictions on the size and ventilation requirements of the equipment.

UVITRON provides a large amount of light curing equipment for American scientific research institutes and large company laboratories, and has gained a high reputation. Now we mainly introduce several schemes for reference.

This is a very economical UV curing box combination, which can meet your control of light intensity / energy, and has accurately measured the combination of UV energy.

Let me talk about the Intelli-Ray 400 full-function light source, equipped with a 400W high-pressure mercury lamp, a parabolic emitter, UVA intensity up to 100mw / cm2, effective curing area 20 * 15cm.

Intensity uniformity, the intensity will attenuate with the direction of the parallel lamps, to the most edge (+/- 10cm) is about 60% of the center. The smaller the curing area, the better the consistency.

Spectral characteristics: Intelli-Ray can choose 4 kinds of bulbs with different spectral characteristics, UVA enhanced (standard), UVB enhanced, and two types of UVV enhanced bulbs. Depending on the application, each has its own emphasis.

Energy adjustment and exposure control: Intelli-Ray has a built-in light intensity adjustment function that can be adjusted from 50% to 100% with an accuracy of 1%. The built-in electronic shutter can accurately set the UV exposure time from 1 to 9999 seconds.

UV OVENS can provide an intelligent locking function to ensure the safety of the operator and allow the height of the lamp to be adjusted.

The UV minder is probably the most economical energy meter. Although the range is a little smaller, it just happens to work with Intelli-ray, so I have to admire the efforts of UVITRON.

The entire system is compact and does not require other ventilation and heat dissipation systems.

This is a powerful light curing system for industrial application experiments. The speed of the conveyor belt is digitally adjustable.

In general, it can meet the requirements with SunRay 400. In some strict applications, Intelli-Ray 400 will also be considered to obtain a lower intensity range.

Some characteristics of the light source are the same as above. The conveyor belt is very simple and lightweight, with no extra settings. With UVICURE PLUS, a UV energy meter specifically configured for conveyor belt UV curing systems, you can easily set the UV energy you need.

The combination of the above UV light curing equipment is a summary of our practical application. A good equipment combination can save you a lot of time, allowing you to focus more on the research and development process while adjusting or repairing the equipment. For details, please contact Huishuo.