Temperature and Humidity Test Chamber

Operating Instructions for Temperature and Humidity Chambers

Using a temperature and humidity test chamber is essential in many industries, especially for testing products under controlled environmental conditions. Whether you're conducting material testing, quality control, or product development, understanding how to operate this equipment properly is crucial. Below is a step-by-step guide to help you use the chamber effectively. 1. **Check the Water Level**: Begin by checking the water level in the humidity tank. Clean the water bottle and fill it with distilled water to prevent scale buildup and sediment. Connect the rubber tube to the faucet and ensure it's properly sealed to avoid contamination. 2. **Set the Desired Conditions**: Adjust the temperature or temperature and humidity settings to your required levels. Turn on the power switch of the chamber to start the process. 3. **Adjust the Dry Bulb Thermometer**: Loosen the temperature adjustment cap on the dry bulb sensor and set the temperature slightly higher than the required test value. The digital display serves as a reference, but always rely on the dry bulb thermometer for accurate readings. 4. **Start Heating**: Switch the power selection switch to “2” to begin heating. Once the chamber reaches the desired temperature, switch it back to “1” to stabilize the temperature and reduce fluctuations during the test. 5. **Control Humidity**: Adjust the water tank temperature to regulate humidity. Typically, the water tank should be 1–2°C cooler than the working chamber. Wait until both the chamber temperature and water tank temperature reach their target values before starting the humidity adjustment. 6. **Place the Test Sample**: Once the chamber is operating normally, place the test sample inside for evaluation or maintenance. 7. **Turn Off and Clean**: After completing the test, turn off the power supply, disconnect the hose, and drain any remaining water from the system. This helps maintain the chamber’s performance and extends its lifespan. At Guangdong Hongzhan, we specialize in providing high-quality testing solutions for a wide range of applications. Our products include cold and thermal shock chambers, high-low temperature impact chambers, and constant temperature and humidity test chambers. With a strong technical team and a commitment to excellence, we aim to deliver reliable and efficient equipment that meets industry standards. We believe in building long-term relationships with our customers based on trust, quality, and innovation. Whether you are a new or existing client, we are here to support you with professional advice and service. Explore our range of products and find the perfect solution for your testing needs. Let us help you achieve better results with confidence!

HT35 Brush Cutter Parts

Ht35 Brush Cutter Parts,Brush Cutter Air Filter,Brush Mower Gearbox,Brush Cutter Shaft Assembly

Shaoxing Haotuo Machinery CO., LTD. , https://www.haotuochinatools.com