Temperature and Humidity Test Chamber

Operating Guide for Temperature and Humidity Test Chamber

Using a temperature and humidity test chamber is an essential part of many quality control and research processes. Whether you're testing materials, electronics, or products under different environmental conditions, following the correct procedures is crucial for accurate results. Here's a step-by-step guide to help you operate the device effectively.

1. Check the water level in the humidity tank and clean the water bottle. Fill it with distilled water to prevent mineral buildup and ensure smooth operation. Attach the rubber tube to the faucet and block it to avoid sediment entering the system.

2. Set the desired temperature or temperature-humidity combination on the control panel and turn on the power switch of the device.

3. Adjust the dry bulb temperature by unscrewing the temperature adjustment cap. Set the temperature slightly higher than the required test value. The display is for reference only; the actual temperature should be confirmed using a dry bulb thermometer.

4. Start the heating process by switching the power selection switch to position "2". Once the chamber reaches the target temperature, switch it to position "1" to reduce temperature fluctuations during the constant temperature phase.

5. Adjust the water tank temperature to control humidity levels. Typically, the water tank temperature should be 1-2°C lower than the working chamber temperature. Wait until both the chamber and water tank reach their set values before starting the test.

6. Place the test specimen inside the chamber once everything is operating normally. Ensure it is positioned correctly for optimal testing conditions.

7. After completing the test, turn off the power supply, disconnect the hose from the chamber, and drain any remaining water to maintain the equipment’s longevity.

Dear Customer,

Hello! Guangdong Hongzhan is a professional team with strong technical capabilities, dedicated to providing high-quality products, comprehensive solutions, and excellent technical support to our customers. Our main products include cold and thermal shock test chambers, high-low temperature impact test chambers, constant temperature and humidity test chambers, and more. We firmly believe in building trust through integrity, maintaining product quality, and continuously advancing the automation industry. With every step forward, we aim to deliver better performance and service to our clients.

We welcome both new and returning customers to explore our range of products with confidence. If you have any questions or need assistance, feel free to contact us. We are here to help you find the perfect solution for your testing needs!

Single Blade Hedge Trimmer

Hedge-trimmer machine mainly includes gasoline engine, transmission mechanism, handle, switch and Blade mechanism, etc. The gasoline engine power drives the blade mechanism to work through the transmission mechanism, the main handle is located at the rear of the machine, the front handle is installed at the front of the machine housing, and the front handle can rotate at a certain Angle, which is characterized by: The main handle is connected with the main body of the machine through the telescoping rod, and the main handle is connected with the telescoping rod or the telescoping rod and the main body of the machine is connected by a rotating mechanism, the hedgerows machine also includes a pair of side handles, the two side handles are also connected by the telescoping rod and the telescoping mechanism is installed on the machine, and the machine is connected by the rotating mechanism. The operator can choose the grip mode, rotation Angle and expansion length of the handle according to the needs and use habits. The operation is simple, convenient, and the work efficiency is high, and the packaging size is small.

Single Blade Hedge Trimmer,Hedge shears,Hedge Trimmer

Shaoxing Haotuo Machinery CO., LTD. , https://www.haotuochinatools.com